Red Hat安装Red Hat OpenShift Local

文章目录

环境
安装
- 需求
- - 硬件
  - 操作系统
  - 软件包
- 安装
使用Red Hat OpenShift Local
- 预设置
- 设置Red Hat OpenShift Local
- 启动实例
- 访问OpenShift集群
- - 访问OpenShift web console
  - 使用OpenShift CLI访问OpenShift集群
  - 访问内部 OpenShift registry
- 使用odo部署示例应用
- - 安装odo
- 停止实例
- 删除实例
参考

环境

RHEL 9.3
Red Hat OpenShift Local 2.32

安装

Red Hat OpenShift Local将最小的OpenShift Container Platform（OCP）4集群和Podman容器运行时引入到本地计算机。这些运行时为开发和测试提供了最小环境。Red Hat OpenShift Local主要用于在开发者的桌面上运行。

Red Hat OpenShift Local包含 crc 命令行界面（CLI），使用所需的容器运行时来与Red Hat OpenShift Local实例交互。

需求

硬件

4个物理CPU核
9 GB内存
35 GB存储

注：9 GB内存貌似不够，我后来扩展到了16 GB内存。35 GB存储也不够， /home 至少需要50 GB存储。

操作系统

最新的两个RHEL/CentOS 8和9 release，以及最新的两个稳定Fedora release。
若使用RHEL，必须已在Red Hat Customer Portal注册。
不支持Ubuntu 18.04 LTS或更高版本，以及Debian 10或更高版本，需要手工搭建。

软件包

需要 libvirt 和 NetworkManager ：

Fedora/Red Hat Enterprise Linux/CentOS： sudo dnf install NetworkManager
Debian/Ubuntu： sudo apt install qemu-kvm libvirt-daemon libvirt-daemon-system network-manager

安装

在 https://console.redhat.com/openshift/create/local 处，下载最新的Red Hat OpenShift Local。

在这里插入图片描述

我下载的文件是 crc-linux-amd64.tar.xz 。

解压：

tar xvf crc-linux-amd64.tar.xz

解压后，生成了 crc 文件。为了方便，将其加入PATH。修改 ~/.bashrc 文件，添加如下内容：

export PATH=/home/ding/Downloads/crc-linux-2.32.0-amd64:$PATH

然后source一下：

. ~/.bashrc

注：本例中使用的是bash，如果使用其它shell，则要做相应的调整。

查看版本：

$ crc version
CRC version: 2.32.0+54a6f9
OpenShift version: 4.14.8
Podman version: 4.4.4

搭建环境：

crc setup

报错说 You need to enable virtualization in BIOS 。这是因为我使用了VMWare Workstation，默认没有开启虚拟机的虚拟化。说白了就是需要虚拟嵌套虚拟。

在虚拟机设置里，勾选“虚拟化Intel VT-x/EPT或AMD-V/RVI”，如下图所示：

在这里插入图片描述
注：需要关闭虚拟机才能修改该选项。

然后再次运行 crc setup 搭建环境，这次成功了：

$ crc setup
INFO Using bundle path /home/ding/.crc/cache/crc_libvirt_4.14.8_amd64.crcbundle 
INFO Checking if running as non-root              
INFO Checking if running inside WSL2              
INFO Checking if crc-admin-helper executable is cached 
INFO Checking if running on a supported CPU architecture 
INFO Checking if crc executable symlink exists    
INFO Checking minimum RAM requirements            
INFO Checking if Virtualization is enabled        
INFO Checking if KVM is enabled                   
INFO Checking if libvirt is installed             
INFO Installing libvirt service and dependencies  
INFO Using root access: Installing virtualization packages 
[sudo] password for ding: 
INFO Checking if user is part of libvirt group    
INFO Adding user to libvirt group                 
INFO Using root access: Adding user to the libvirt group 
INFO Checking if active user/process is currently part of the libvirt group 
INFO Checking if libvirt daemon is running        
WARN No active (running) libvirtd systemd unit could be found - make sure one of libvirt systemd units is enabled so that it's autostarted at boot time. 
INFO Starting libvirt service                     
INFO Using root access: Executing systemctl daemon-reload command 
INFO Using root access: Executing systemctl start libvirtd 
INFO Checking if a supported libvirt version is installed 
INFO Checking if crc-driver-libvirt is installed  
INFO Installing crc-driver-libvirt                
INFO Checking crc daemon systemd service          
INFO Setting up crc daemon systemd service        
INFO Checking crc daemon systemd socket units     
INFO Setting up crc daemon systemd socket units   
INFO Checking if systemd-networkd is running      
INFO Checking if NetworkManager is installed      
INFO Checking if NetworkManager service is running 
INFO Checking if /etc/NetworkManager/conf.d/crc-nm-dnsmasq.conf exists 
INFO Writing Network Manager config for crc       
INFO Using root access: Writing NetworkManager configuration to /etc/NetworkManager/conf.d/crc-nm-dnsmasq.conf 
INFO Using root access: Changing permissions for /etc/NetworkManager/conf.d/crc-nm-dnsmasq.conf to 644  
INFO Using root access: Executing systemctl daemon-reload command 
INFO Using root access: Executing systemctl reload NetworkManager 
INFO Checking if /etc/NetworkManager/dnsmasq.d/crc.conf exists 
INFO Writing dnsmasq config for crc               
INFO Using root access: Writing NetworkManager configuration to /etc/NetworkManager/dnsmasq.d/crc.conf 
INFO Using root access: Changing permissions for /etc/NetworkManager/dnsmasq.d/crc.conf to 644  
INFO Using root access: Executing systemctl daemon-reload command 
INFO Using root access: Executing systemctl reload NetworkManager 
INFO Checking if libvirt 'crc' network is available 
INFO Setting up libvirt 'crc' network             
INFO Checking if libvirt 'crc' network is active  
INFO Starting libvirt 'crc' network               
INFO Checking if CRC bundle is extracted in '$HOME/.crc' 
INFO Checking if /home/ding/.crc/cache/crc_libvirt_4.14.8_amd64.crcbundle exists 
INFO Getting bundle for the CRC executable        
INFO Downloading bundle: /home/ding/.crc/cache/crc_libvirt_4.14.8_amd64.crcbundle... 
4.36 GiB / 4.36 GiB [----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------] 100.00% 1.33 MiB/s
INFO Uncompressing /home/ding/.crc/cache/crc_libvirt_4.14.8_amd64.crcbundle 
crc.qcow2:  17.12 GiB / 17.12 GiB [-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------] 100.00%
oc:  145.59 MiB / 145.59 MiB [------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------] 100.00%
Your system is correctly setup for using CRC. Use 'crc start' to start the instance

注：下载bundle那一步特别慢，bundle有4.36 GiB，下载了半个多小时。

接下来，启动crc：

$ crc start
INFO Using bundle path /home/ding/.crc/cache/crc_libvirt_4.14.8_amd64.crcbundle 
INFO Checking if running as non-root              
INFO Checking if running inside WSL2              
INFO Checking if crc-admin-helper executable is cached 
INFO Checking if running on a supported CPU architecture 
INFO Checking if crc executable symlink exists    
INFO Checking minimum RAM requirements            
INFO Checking if Virtualization is enabled        
INFO Checking if KVM is enabled                   
INFO Checking if libvirt is installed             
INFO Checking if user is part of libvirt group    
INFO Checking if active user/process is currently part of the libvirt group 
INFO Checking if libvirt daemon is running        
INFO Checking if a supported libvirt version is installed 
INFO Checking if crc-driver-libvirt is installed  
INFO Checking crc daemon systemd socket units     
INFO Checking if systemd-networkd is running      
INFO Checking if NetworkManager is installed      
INFO Checking if NetworkManager service is running 
INFO Checking if /etc/NetworkManager/conf.d/crc-nm-dnsmasq.conf exists 
INFO Checking if /etc/NetworkManager/dnsmasq.d/crc.conf exists 
INFO Checking if libvirt 'crc' network is available 
INFO Checking if libvirt 'crc' network is active  
INFO Loading bundle: crc_libvirt_4.14.8_amd64...  
CRC requires a pull secret to download content from Red Hat.
You can copy it from the Pull Secret section of https://console.redhat.com/openshift/create/local.
? Please enter the pull secret

此处需要输入pull secret，在下载页面可以获取：

在这里插入图片描述

复制pull secret，并回车：

......
? Please enter the pull secret **************************************************************************************************************************************************************************************************************INFO Creating CRC VM for OpenShift 4.14.8...      
INFO Generating new SSH key pair...               
INFO Generating new password for the kubeadmin user 
INFO Starting CRC VM for openshift 4.14.8...      
INFO CRC instance is running with IP 192.168.130.11 
INFO CRC VM is running                            
INFO Updating authorized keys...                  
INFO Configuring shared directories               
INFO Check internal and public DNS query...       
INFO Check DNS query from host...                 
INFO Verifying validity of the kubelet certificates... 
INFO Starting kubelet service                     
INFO Waiting for kube-apiserver availability... [takes around 2min] 
INFO Adding user's pull secret to the cluster...  
INFO Updating SSH key to machine config resource... 
INFO Waiting until the user's pull secret is written to the instance disk... 
INFO Changing the password for the kubeadmin user 
INFO Updating cluster ID...                       
INFO Updating root CA cert to admin-kubeconfig-client-ca configmap... 
INFO Starting openshift instance... [waiting for the cluster to stabilize] 
INFO 6 operators are progressing: image-registry, ingress, kube-storage-version-migrator, network, openshift-controller-manager, ... 
INFO 4 operators are progressing: image-registry, ingress, openshift-controller-manager, operator-lifecycle-manager-packageserver 
INFO 3 operators are progressing: image-registry, ingress, openshift-controller-manager 
INFO 3 operators are progressing: image-registry, ingress, openshift-controller-manager 
INFO 3 operators are progressing: image-registry, ingress, openshift-controller-manager 
INFO 3 operators are progressing: image-registry, ingress, openshift-controller-manager 
INFO Operator ingress is progressing              
INFO All operators are available. Ensuring stability... 
INFO Operators are stable (2/3)...                
INFO Operators are stable (3/3)...                
INFO Adding crc-admin and crc-developer contexts to kubeconfig... 
Started the OpenShift cluster.The server is accessible via web console at:https://console-openshift-console.apps-crc.testingLog in as administrator:Username: kubeadminPassword: MGYZW-7CR7e-JSAoF-3oNH3Log in as user:Username: developerPassword: developerUse the 'oc' command line interface:$ eval $(crc oc-env)$ oc login -u developer https://api.crc.testing:6443

从输出可见，有两种使用方式：

web console： https://console-openshift-console.apps-crc.testing （ kubeadmin/MGYZW-7CR7e-JSAoF-3oNH3 developer/developer ）
命令行：先用 eval $(crc oc-env) ，然后就可以使用 oc 命令了。

注： crc oc-env 的结果如下：

$ crc oc-env
export PATH="/home/ding/.crc/bin/oc:$PATH"
# Run this command to configure your shell:
# eval $(crc oc-env)

eval 表示运行命令，本例中也就是运行export命令。

如果嫌麻烦，也可以把该export命令放到 ~/.bashrc 里，以后就不用每次都运行 eval $(crc oc-env) 了。具体方法参见前面。

查看 oc 版本：

$ oc version
Client Version: 4.14.8
Kustomize Version: v5.0.1
Server Version: 4.14.8
Kubernetes Version: v1.27.8+4fab27b

使用Red Hat OpenShift Local

预设置

Red Hat OpenShift Local预设置代表一个托管的容器运行时，以及运行它的实例所需的系统资源绑定。Red Hat OpenShift Local提供以下预设置：

openshift：最小的预配置的OCP 4.14集群
microshift：MicroShift
podman：podman容器运行时

设置Red Hat OpenShift Local

crc setup

crc setup 命令为Red Hat OpenShift Local实例搭建主机环境。

crc setup 命令会创建 ~/.crc 目录（如果该目录不存在）。

注意：不要以 root 用户或管理员运行 crc ，而要使用user帐户。

启动实例

crc start

访问OpenShift集群

访问OpenShift web console

$ crc console
Opening the OpenShift Web Console in the default browser...

自动打开浏览器，如下：

在这里插入图片描述

其地址为： https://console-openshift-console.apps-crc.testing

要想查看用户名和密码，使用如下命令：

$ crc console --credentials
To login as a regular user, run 'oc login -u developer -p developer https://api.crc.testing:6443'.
To login as an admin, run 'oc login -u kubeadmin -p wYUUp-aWcy7-3z27T-jSjQH https://api.crc.testing:6443'

使用 developer/developer 登录console，如下：

在这里插入图片描述

注意图片上有个报错信息，与网络有关，稍后会提到。

使用OpenShift CLI访问OpenShift集群

使用OpenShift CLI（ oc ）访问由Red Hat OpenShift Local管理的OCP集群。

$ oc login -u developer https://api.crc.testing:6443
error: dial tcp 192.168.130.11:6443: connect: no route to host - verify you have provided the correct host and port and that the server is currently running.

报错说 no route to host 。其实访问web console时，从截图上可以看到，也报错了。

$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00inet 127.0.0.1/8 scope host lovalid_lft forever preferred_lft foreverinet6 ::1/128 scope host valid_lft forever preferred_lft forever
2: ens160: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000link/ether 00:0c:29:16:52:eb brd ff:ff:ff:ff:ff:ffaltname enp3s0inet 192.168.1.12/24 brd 192.168.1.255 scope global dynamic noprefixroute ens160valid_lft 82326sec preferred_lft 82326secinet6 2408:8207:18b0:e4c0:20c:29ff:fe16:52eb/64 scope global dynamic noprefixroute valid_lft 199309sec preferred_lft 112909secinet6 fe80::20c:29ff:fe16:52eb/64 scope link noprefixroute valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000link/ether 52:54:00:54:2d:98 brd ff:ff:ff:ff:ff:ffinet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0valid_lft forever preferred_lft forever
4: crc: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000link/ether 52:54:00:fd:be:d0 brd ff:ff:ff:ff:ff:ffinet 192.168.130.1/24 brd 192.168.130.255 scope global crcvalid_lft forever preferred_lft forever

可见，并没有 192.168.130.11 这个IP地址。这是从哪来的呢？

查看 /etc/NetworkManager/dnsmasq.d/crc.conf ：

server=/apps-crc.testing/192.168.130.11
server=/crc.testing/192.168.130.11

查看 /etc/hosts ：

127.0.0.1        localhost localhost.localdomain localhost4 localhost4.localdomain4
::1              localhost localhost.localdomain localhost6 localhost6.localdomain6# Added by CRC
192.168.130.11   api.crc.testing canary-openshift-ingress-canary.apps-crc.testing console-openshift-console.apps-crc.testing default-route-openshift-image-registry.apps-crc.testing downloads-openshift-console.apps-crc.testing oauth-openshift.apps-crc.testing
# End of CRC section

可见，是CRC添加的这个IP地址。

~~我在网上google了一下，搜到这个issue：https://github.com/crc-org/crc/issues/695 。~~

~~里面提到，要修改 /etc/resolv.conf ，添加：~~

nameserver 192.168.130.11 # IP address of the crc vm

~~完整内容如下：~~

# Generated by NetworkManager
nameserver 192.168.130.11 # IP address of the crc vm
nameserver 127.0.0.1
options edns0 trust-ad

~~然后重新搭建crc：~~

crc delete -f && crc setup && crc start

~~这次OK了。~~

$ oc login -u developer https://api.crc.testing:6443
Logged into "https://api.crc.testing:6443" as "developer" using existing credentials.You don't have any projects. You can try to create a new project, by runningoc new-project <projectname>

~~但是，没过一会儿，又开始报错了。~~

注：貌似和修改 /etc/resolv.conf 无关，暂时OK是因为重启了crc。

真正的原因我也没搞明白，可能是因为内存不够用？参见下面。

由于crc启动特别慢，占的内存非常大，所以我给虚拟机增大了内存，由10240MB增大到了16384MB。然后重启虚拟机，再重新搭建crc环境，这次貌似好了，而且 /etc/resolv.conf 被自动恢复成原来的内容了。看来之前报错不是 /etc/resolv.conf 的问题，难道是因为内存不够用？

访问内部 OpenShift registry

在Red Hat OpenShift Local实例中运行的OCP集群默认包含一个内部容器image registry，可用作本地开发的容器image的发布目标。要访问内部的OCP registry，操作如下：

查看当前用户：

$ oc whoami
kubeadmin

登录registry：

$ oc registry login --insecure=true
info: Using registry public hostname default-route-openshift-image-registry.apps-crc.testing
Saved credentials for default-route-openshift-image-registry.apps-crc.testing into /run/user/1000/containers/auth.json

创建一个project：

$ oc new-project demo
Now using project "demo" on server "https://api.crc.testing:6443".You can add applications to this project with the 'new-app' command. For example, try:oc new-app rails-postgresql-exampleto build a new example application in Ruby. Or use kubectl to deploy a simple Kubernetes application:kubectl create deployment hello-node --image=registry.k8s.io/e2e-test-images/agnhost:2.43 -- /agnhost serve-hostname

注：OCP里的project类似于Kubernetes里的namespace。

镜像一个容器image例子：

$ oc image mirror registry.access.redhat.com/ubi8/ubi:latest=default-route-openshift-image-registry.apps-crc.testing/demo/ubi8:latest --insecure=true --filter-by-os=linux/amd64
default-route-openshift-image-registry.apps-crc.testing/demo/ubi8blobs:registry.access.redhat.com/ubi8/ubi sha256:179275e28757e902d242e99738cd114c81b0ed29ff316bb4a894520ff0d1788f 6.271KiBregistry.access.redhat.com/ubi8/ubi sha256:e5dd65eaa63224754368dcdbf2fea59a5ac3226ace1879d2899343d46d7fffa0 75.11MiBmanifests:sha256:1a6f007562e41dae23fb3a573664d48018d094ec3cd01c96474cbbf7aef54572 -> lateststats: shared=0 unique=2 size=75.12MiB ratio=1.00phase 0:default-route-openshift-image-registry.apps-crc.testing demo/ubi8 blobs=2 mounts=0 manifests=1 shared=0info: Planning completed in 2.22s
uploading: default-route-openshift-image-registry.apps-crc.testing/demo/ubi8 sha256:e5dd65eaa63224754368dcdbf2fea59a5ac3226ace1879d2899343d46d7fffa0 75.11MiB
sha256:1a6f007562e41dae23fb3a573664d48018d094ec3cd01c96474cbbf7aef54572 default-route-openshift-image-registry.apps-crc.testing/demo/ubi8:latest
info: Mirroring completed in 3.84s (20.47MB/s)

查看imagestream：

$ oc get is
NAME   IMAGE REPOSITORY                                                    TAGS     UPDATED
ubi8   default-route-openshift-image-registry.apps-crc.testing/demo/ubi8   latest   About a minute ago

在imagestream中启用image查找：

$ oc set image-lookup ubi8
imagestream.image.openshift.io/ubi8 image lookup updated

该设置允许imagestream作为image源，而无需提供内部registry的完整URL。

使用刚刚push的image创建pod：

$ oc run demo --image=ubi8 --command -- sleep 600s
Warning: would violate PodSecurity "restricted:v1.24": allowPrivilegeEscalation != false (container "demo" must set securityContext.allowPrivilegeEscalation=false), unrestricted capabilities (container "demo" must set securityContext.capabilities.drop=["ALL"]), runAsNonRoot != true (pod or container "demo" must set securityContext.runAsNonRoot=true), seccompProfile (pod or container "demo" must set securityContext.seccompProfile.type to "RuntimeDefault" or "Localhost")
pod/demo created

查看pod：

$ oc get pod
NAME   READY   STATUS    RESTARTS   AGE
demo   1/1     Running   0          50s

使用odo部署示例应用

可以使用 odo 来创建OpenShift project和应用。本例将一个示例应用部署到Red Hat OpenShift Local实例中运行的OCP集群。

安装odo

参见 https://odo.dev/docs/overview/installation 。

下载：

curl -L https://developers.redhat.com/content-gateway/rest/mirror/pub/openshift-v4/clients/odo/v3.15.0/odo-linux-amd64 -o odo

安装：

sudo install -o root -g root -m 0755 odo /usr/local/bin/odo

查看版本：

$ odo version
odo v3.15.0 (10b5e8a8f)Server: https://api.crc.testing:6443
Kubernetes: v1.27.8+4fab27b
Podman Client: 4.6.1

$ odo login -u developer -p developer
? Help odo improve by allowing it to collect usage data. Read about our privacy statement: https://developers.redhat.com/article/tool-data-collection. You can change your preference later by changing the ConsentTelemetry preference. (Y/n? Help odo improve by allowing it to collect usage data. Read about our privacy statement: https://developers.redhat.com/article/tool-data-collection. You can change your preference later by changing the ConsentTelemetry preference. Yes
Connecting to the OpenShift clusterLogin successful.You don't have any projects. You can try to create a new project, by runningodo create project <projectname>

注：官网上的odo貌似是v2，而我下载的odo是v3，二者不太兼容，参见 https://odo.dev/docs/user-guides/v3-migration-guide 。

关于odo，后面的例子我没再继续做。

停止实例

$ crc stop
INFO Stopping kubelet and all containers...       
INFO Stopping the instance, this may take a few minutes... 
Stopped the instance

删除实例

$ crc delete
Do you want to delete the instance? [y/N]: y
Deleted the instance

注意：该命令会导致Red Hat OpenShift Local实例中存储的数据丢失。

参考

https://access.redhat.com/documentation/en-us/red_hat_openshift_local/2.32/html-single/getting_started_guide/index
https://developers.redhat.com/products/openshift-local/overview
https://console.redhat.com/openshift/create/local
https://github.com/crc-org/crc/issues/695
https://odo.dev/docs/overview/installation